Bubble film machine (air cushion film machine) operation safety instructions
1. When the machine is in the initial position, the film is flown on the turntable or the cargo, and the active running button of the bubble film machine (air cushion film machine) is pressed;
2. The turntable starts to decelerate to the highest speed, and the turntable starts to decelerate to the highest speed. The film is actively input with the turntable, and the turntable counts. When the bottom set value is reached, the film frame begins to fall.
3. When the film holder is lowered until the photoelectric switch reflects the goods, the film holder is lowered until the photoelectric switch fails to reflect the goods. After the delay setting, the film frame stops falling, the height of the baler is counted once, the turntable continues to run, and the turntable counts. When the set top layer number is reached, the film frame is lowered, and the film frame is stopped when it is lowered to the bottom. Count the number of times again, and start counting the number of bottom laps.
4. By the way, when the number of times reaches the set value, the packaging process is completed. The turntable slowly stretched the film and the initial inspection point was aborted.