News Center

Industry News

Bubble film machine (air cushion film machine) standardized operation

Time:2018/8/12Author:adminClick: 615
The mechanical equipment that is indispensable in the production of bubble film is the bubble film machine (air film machine). The bubble film is actually a film containing a bubble interlayer in the middle of the film. If you do not control the bubble film machine (air cushion film machine), it is very likely that under the limited time and material constraints, your product quality and output are not so ideal; otherwise, if you control the bubble machine ( Air cushion film machine), under the limited time and material constraints, your product quality is not only high quality, the product output is also very full. Then how to regulate the operation of our bubble film machine (air cushion film machine), the following is a simple introduction for everyone.
1. Check that the temperature is self-controlled and the heating appliance is in good condition. Pay attention to adjust the heating temperature of each point in time within the index range.
2. Check the traction speed and control the film thickness.
3. Observe the uniformity of the thickness of the adjustment film, and the folding diameter conforms to the standard.
4. Check the air storage cylinder pressure, not too high, but there should be spare pressure.
5. Check and control the ratio of raw materials and mix well.
6. Check the raw materials for impurities. In particular, check the irons in time with a magnet.
7. Check the lubricating oil lubrication of the gearbox and air compressor cylinder.
8. Regularly check the temperature rise of each running motor and the transmission of the bubble film machine.