News Center

Industry News

What should I do after the air cushion film machine (bubble film machine) fails?

Time:2018/12/6Author:adminClick: 427
What should I do after a gas cushion film machine (bubble film machine) fails, share some tips to keep her running.

1. There are impurities in the air cushion film machine (bubble film machine). If there is too much dust in the surrounding environment, machine failure will occur. Therefore, it is necessary to pay attention to environmental sanitation. After the work is finished, it is necessary to check. If too much impurities are needed, it is necessary to carry out corresponding deal with;

2. The traction speed of the air cushion film machine (bubble film machine) is not constant, and it constantly changes, which will affect the operation of the machine. Therefore, it is necessary to check the mechanical transmission device so that the traction speed is kept constant.

Air cushion film machine (bubble film machine)

The product produced by the air cushion film machine (bubble film machine) has a good shock absorption effect in the package and has a wide range of applications.

The air cushion film machine (bubble film machine) series can produce single or double air cushion film machine (bubble film machine) products between 500mm and 1800mm from raw materials, which are widely used in precision electronic instruments, handicrafts, automobiles, motorcycles and bicycle accessories. Etc., air cushion film machine (bubble film machine) produces products with light weight, good elasticity, high transparency, sound insulation and shockproof performance. The air-cushion film machine (bubble film machine) comprises a front conveyor belt, a hot-cutting fusion device, a rear conveyor belt and a power device. The front conveyor belt of the product includes, along the direction of the bubble film conveying, the optical axis conveying rod, the double feeding rubber roller, the upper and lower conveyor belt, The gap between the upper and lower conveyor belts near the bubble film is as large as the thickness of the bubble film, and a plurality of positioning belts are disposed on the conveyor belt.

The gap between the upper and lower conveyor belts near the bubble film is as large as the thickness of the bubble film, which ensures that the bubble film delivered has sufficient space for movement, and the bubble film does not cause damage; the positioning belt provided on the conveyor belt ensures the The direction of transport makes the position of the bubble film outputted without deviation; therefore, the operation is simple, the yield is high, and the production cost is reduced.