News Center

Industry News

Bubble film machine (air cushion film machine) needs normalized operation, normal production of bubble film

Time:2018/12/26Author:adminClick: 461
The mechanical equipment that is indispensable in the production of bubble (pad) film is the bubble film machine (air cushion film machine). The bubble (pad) film is actually a film containing a bubble interlayer in the middle of the film. If you do not control the bubble film (mat) machine, it is very likely that under the limited time and material constraints, your product quality and output are not so ideal; otherwise, if you control the bubble (mat) film machine Under the limited time and material constraints, your product quality is not only high quality, but also the product output is very full. Then how to regulate the operation of our bubble film machine, the following bubble machine (air cushion film machine) manufacturers introduce the standardized operation of the bubble film machine (air cushion film machine).
1. Check the lubrication of the gearbox and the cylinder of the air compressor.
2. Check the raw materials for impurities. In particular, check the irons in time with a magnet.
3. Check and control the ratio of raw materials and mix them evenly.
4. Regularly check the temperature rise of each running motor and the transmission of the bubble film machine.
5. Observe and adjust the thickness of the film evenly, and the folding diameter conforms to the standard.
6. Check the traction speed and control the film thickness.
7. Check that the temperature is self-controlled and the heating appliance is in good condition. Pay attention to adjust the heating temperature of each point in time within the index range.
8. Check the air storage cylinder pressure, not too high, but there should be spare pressure.