News Center

Industry News

Bubble (mat) film machine needs normalized operation, normal production of bubble film

Time:2018/6/2Author:adminClick: 343
The indispensable mechanical device in the bubble (pad) film production process is a bubble (pad) film machine. The bubble (pad) film is actually a film containing a bubble sandwich in the middle of the film. If you do not control the bubble film (mat) machine, it is likely that in a limited time and material constraints, your product quality and output are not so ideal; otherwise, if you control the bubble (pad) film machine , With limited time and material constraints, your product quality is not only good, the product output is also very full. Then how to regulate our bubble film machine operation,

 

The bubble (pad) machine manufacturers will introduce the normal operation of the bubble (pad) film machine for everyone.

1, check the reduction gear box and air compressor cylinder lubrication oil lubrication.

2. Check the raw materials for impurities. In particular, check the iron with the magnets in time.

3, check and control the ratio of raw materials and mix well.

4. Regularly check the temperature rise of the running motor and the drive of the bubble film machine.

5. Observe that the thickness of the film is uniform and the folding diameter conforms to the standard.

6. Check the traction speed and control the film thickness.

7. Check that the temperature is controlled automatically and the heating device is in good condition. Pay attention to adjust the heating temperature of each point in time within the index range.

8, check the air storage cylinder pressure, not too high, but there should be standby pressure.